|
|
| >>>
Liquid Section
>> Colloid Mill |
|
|
 |
Colloid
Mill is an ideal and perfect homogenizer-cum-emulsifier. It
finds its application in various processes like grinding,
homogenizing, emulsifying, dispersing, mixin, extracting etc.,
catering to the needs of several industries, such as
1. Pharmaceutical Industry.
2. Food, Dairy, Sweetmeats and confectionery Industry.
3. Chemical Industry.
4. Paint Industry.
5. Textile Industry.
6. Cosmetic and Detergent Industry
7. Rubber Industry
8. Sausage Production and meat packing Industry
9. Starch Industry.
10. Paper Industry
Outstanding
and rigid design criteria combined with excellent quality
of workmanship of colloid mill automatically ensures superior
end product. It is suitable for small, medium, as well as
large batches of production.
|
|
|
CONTRUCTION
Colloid Mill is driven by a special vertical type high speed motor,
which alongwith a stainless steel housing provides working area
of the mill. Circular ring shaped stator assembly having two different
tooth stages, and the conical rotor which is directly coupled with
the motor shaft, are housed in the housing. The perfectly matched
conical shape of the rotor and stator permits to axially adjust
the grinding gap to an accuracy of 0.10 mm. The opening or closing
of this gap is calibrated on a scale. One rotation of the adjusting
ring corresponds to a grinding gap 0.5mm.
OPERATION
Colloid Mill the product is subjected to high shearing, cutting,
and rubbing forces between two toothed surfaces. The product, while
passing down the hopper, initially gets seized in the preliminary
breaking drum where it is broken and thrown in to the centrifugal
effect of the rotor rotating at a speed of 2800 RPM,.the material
is forced in to second tooth stage. The tooth design of the grinding
set causes powerful vibrations, which subject the particles with
high degree of forces. Intense whirling multiplies the grinding
and mixing effect. The process is continued till the material reaches
the lowest grinding stage. The ground material continuously leaves
the mill through the outlet pipe, if required, it can be recalculated.
SPECIAL
FEATURES
-
Simple contruction permits the ease of cleaning. Normally, flushing
of water or suitable solvent cleans the mill. If required. The
operating parts can be easily dismantled for through cleaning
or sterilization.
-
Feed Hopper, recirculating pipe and mouth hopper are supplied
as standerd with Colloid Mill.
-
Colloid Mill is available in water Jacketed model also. This
version is recommended for processing materials, which generate
lot of heat during milling operation and are sensitive to heat.
-
All contact parts of the mill are made pf stainless steel.
-
Model with flameproof electrical fitting is available on request.
|
Technical
Data
|
| Type |
JTS-1 |
| Electric
Motor |
0.5
HP, 1440 RPM, 440 V, 3 phase 50 Hz |
| Capasity
(Strip Width) |
40
to 90 MM. |
| Output |
800
to 1800 strip/hour [approx] depending upon strips size. |
| Overall
Dimension |
32"
x 22" x 26" [H] |
| Net
Weight |
95
Kgs. |
| Gross
Weight |
115
Kgs. |
|
|
|
