JAYSHREE Gravity metal detector systems are designed to detect metal contamination in dry, powdery or granular free-flowing products that can be gravity fed through a pipe. The compact design includes a rotary activated valve, inspection tube, metal detector search head, and air controls. This package can be ceiling suspended or mounted on a mobile floor stand. The control unit can be mounted either to the system frame or remotely in your plant. Gravity Feed Metal Detectors can also be installed to the pipeline. This system features high sensitivity, high throughput and is compact in size; it comes normally in round configurations but also available in rectangular search heads. Both the reject chute and frame are stainless steel.
The inspection chute going through the metal detector is made from polypropylene, nylon, Teflon or Plastic, depending on the application. JAYSHREE Gravity feed Metal Detection systems are designed to minimize system space, and product waste while insuring maximum sensitivity to all metals. The metal free product passed straight through the mechanism and diverts the ferrous, non-ferrous and stainless steel contamination from the main flow. Systems are available in Aluminum or Stainless Steel casing, with a selection of pipe sizes. The Diverter Valve reject system is typically used to divert contaminated product into a reject tank. JAYSHREE Gravity Feed Metal Detectors incorporates a simplified and refined design of automatic balance coil principle which eliminates all setting up controls and permits long consistent performance.
Salient Features :-
- High sensitivity
- Automatic rejection of contaminated product
- Compact design
- Straight through flow design. No crevices or traps
- Fast acting electronics
- Comprehensive self diagnostic system
- Automatic noise compensation
- Reject confirmation
Product Applications :-
- Food ingredients
- Chemical & Dyes.
- Spices.
- Food Processing.
- Pharmaceuticals.
- Dough.
- Plastic Pellets.
- Bulk Drugs.
- Namkeens.
- Rubber Granules.
- Dehydrated Materials.
- Free Flow Powders.
HACCP Compliance
Performance validation
According to HACCP metal detectors are classified as critical control points. Continuous checking is required to fulfill the standards.
Operation History
Metal detections or changes in parameter settings etc. are stored in a log list stating date and time. The list can be read on the display or exported via serial port.
Password protection
Prevents any unauthorized operation of the metal detector
By using Plug In Type Cards all circuits have been miniaturized and housed on just one multilayer main board. In the unlikely case of a malfunction, most factory electricians should be able to replace the board